| Name | Characteristics | Application | Diagram | Form | Temperature |
|
Name
Standard Type
(Without any attached) Gasket Thickness: 4.50mm |
Characteristics
|
Application
PTFE: Sealed Strong Acid Graphite: For high vacuum or high temperature environment, where the need for a fully enclosed seal; Or for use in high thermal cycling, but do not request the extra bolt locking place Asbestos / Non-Asbestos: Delivery of oxygen line seal |
Diagram
|
Form
|
Temperature
Service Temperature: PTFE: Up to 572°F(300°C) Graphite: In oxidizing / reducing atmosphere -464°to 1472°F (-240°to 800°C) Asbestos / Non-Asbestos: Up to 752°F(400°C) Service Pressure: PTFE/Graphite: Steam & Gases : 200 kg/cm2 Hot Water, Oil, Corrosive Liquid & Gases, Strong Acids, Alkalis, Organic Solvents : 300 kg/cm2 Asbestos / Non-Asbestos: Gases：70 kg/cm2 Steam, Organic：100 kg/cm2 Water：300 kg/cm2 |
|
Name
External Ring Type
(With External Ring) Low Carbon Steel: 3.20mm Stainless Steel: 3.00mm Gasket Thickness: 4.50mm |
Characteristics
|
Application
PTFE: Sealed Strong Acid Graphite: For high vacuum or high temperature environment, where the need for a fully enclosed seal; Or for use in high thermal cycling, but do not request the extra bolt locking place Asbestos / Non-Asbestos: Delivery of oxygen line seal |
Diagram
|
Form
|
Temperature
Service Temperature: PTFE: Up to 572°F(300°C) Graphite: In oxidizing / reducing atmosphere -464°to 1472°F (-240°to 800°C) Asbestos / Non-Asbestos: Up to 752°F(400°C) Service Pressure: PTFE/Graphite: Steam & Gases : 200 kg/cm2 Hot Water, Oil, Corrosive Liquid & Gases, Strong Acids, Alkalis, Organic Solvents : 300 kg/cm2 Asbestos / Non-Asbestos: Gases：70 kg/cm2 Steam, Organic：100 kg/cm2 Water：300 kg/cm2 |
|
Name
Internal & External Ring Type
(With Internal & External Ring) Low Carbon Steel: 3.20mm Stainless Steel: 3.00mm Gasket Thickness: 4.50mm |
Characteristics
|
Application
PTFE: Sealed Strong Acid Graphite: For high vacuum or high temperature environment, where the need for a fully enclosed seal; Or for use in high thermal cycling, but do not request the extra bolt locking place Asbestos / Non-Asbestos: Delivery of oxygen line seal |
Diagram
|
Form
|
Temperature
Service Temperature: PTFE: Up to 572°F(300°C) Graphite: In oxidizing / reducing atmosphere -464°to 1472°F (-240°to 800°C) Asbestos / Non-Asbestos: Up to 752°F(400°C) Service Pressure: PTFE/Graphite: Steam & Gases : 200 kg/cm2 Hot Water, Oil, Corrosive Liquid & Gases, Strong Acids, Alkalis, Organic Solvents : 300 kg/cm2 Asbestos / Non-Asbestos: Gases：70 kg/cm2 Steam, Organic：100 kg/cm2 Water：300 kg/cm2 |
